DBX 223XS

crossover 2 pásma stereo, 3 pásma mono, XLR, 1UINPUTS

Connectors: XLR (pin 2 hot)

Type: Electronically balanced/unbalanced, RF filtered

Impedance: Balanced >50k ohm, unbalanced >25k ohm

Max Input Level: >+22dBu balanced or unbalanced
OUTPUTS

Connectors: XLR

Type: Electronically-balanaced/unbalanced, RF filtered

Impedance: Balanced 60 ohm, unbalanced 30 ohm

Max Output Level: >+20dBu balanced/unbalanced into 600 ohms or greater
CROSSOVER FREQUENCIES

Stereo Mode: Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Mono Mode: Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
FUNCTION SWITCHES

Front Panel (Low Cut): Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel

Phase Invert: Inverts the phase at the output, one switch per output

Rear Panel: x10: Multiplies the crossover frequency range by 10, one switch per channel
Mode: Selects stereo/mono and 2/3-way operation.
LF sum: Selects normal (stereo) or mono-summed low frequency operation.
INDICATORS

Stereo Operation: Green LED

Mono Operation: Yellow LED

Low Cut: Red LED per channel

x10 Green LED per channel

Phase Invert: Red LED per output (3 per channel)
SYSTEM PERFORMANCE

Bandwidth: 20Hz to 20kHz, +0/-0.5dB

Frequency Response: < 3Hz to > 90kHz, +0/-3 dB

Dynamic Range: >106dB, unweighted, any output

THD + Noise: 94dB (Low Output)
>91dB (High Output)

Mono Mode: >94dB (Low Output)
>93dB (Mid Output)
>91dB (High Output)
POWER SUPPLY

Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50/60HZ

Power consumption: 15W

Operating Temperature: 32°F to 113°F (0°C to 45°C)
PHYSICAL

Dimensions: 1.75" H X 6.9" D X 19" W (4.5cm x 17.5cm x 48.26cm )

Weight: 3.7 lbs. (1.7 kg)

Shipping Weight: 5.4 lbs. (2.5 kg)