Kde jsem:  Katalog  >  Vyhledávání

Wynns high pressure 3

Nalezeno:    302 produktů

Corsair ML Pro RGB 120 Single High Static Pressure 4 pin

Výrobce: Corsair; Třída produktu: Ventilátor do skříní; Velikost ventilátoru: 120 mm; Typ ložiska ventilátoru: Magnetic Barometric Bearing; Rychlost otáček ventilátoru: 400-1600 ot./min; Hlučnost ventilátoru: -25 dB; Šířka: 120 mm; Výška: 120 mm; Tloušťka: 25 mm; Typ konektoru napájení: 4-pin; Životnost: nedostatek dat; Průtok vzduchu (Air flow): -47,3 CFM; Barva LED diod: vícebarevný; Další informace: www.corsair.com [LINK]

SAE AS1722A 1.3.2003

Platná norma SAE AS1722A Hose, Polytetrafluoroethylene (Tfe), Lightweight, High Temperature and High Pressure (3000 Psig) With Integral Fire Protection

BS 7403-3:1998 15.3.1998

Platná norma BS 7403-3:1998 Full-flow lubricating oil filters for internal combustion engines. Methods of test for resistance to high differential pressure and to elevated temperature

BS 3016-3:1960 22.9.1960

Neplatná norma BS 3016-3:1960 Pressure regulators for use with butane/propane gases. Variable high pressure regulators.

DIN 16505 1.3.1954

Neplatná norma DIN 16505 Dimensions for high-pressure plates (except of etching plates) and ancillary packing material; main dimensions.

SAE AMSR83283A 1.3.2014

Platná norma SAE AMSR83283A Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type (Stabilized: Mar 2014)

E DIN 16926 1.3.1984

Neplatná norma E DIN 16926 Decorative high pressure laminates; classification, requirements and testing.

DIN EN 60188 1.3.2002

Platná norma DIN EN 60188 High-pressure mercury vapour lamps - Performance specifications.

E DIN IEC 60662 1.3.1982

Neplatná norma E DIN IEC 60662 High-pressure sodium vapour lamps.

ISO 15616-3:2003 5.3.2003

Platná norma ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 3: Calibration of instruments for measurement of gas flow and pressure (Essais de réception des machines de soudage et de coupage de qualité par faisceau laser CO2 -- Partie 3: Étalonnage des instruments de mesure de débit et de pression des gaz d`assistance)

ASME BPVC-VIII-3:2017 2017

Platná norma ASME BPVC-VIII-3:2017 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels

BS ISO 9022-8:2015 31.3.2015

Platná norma BS ISO 9022-8:2015 Optics and photonics. Environmental test methods. High internal pressure, low internal pressure, immersion

BS C 9:1970 31.3.1970

Platná norma BS C 9:1970 Specification for coupling dimensions for high pressure air charging valves for aircraft

BS ISO 13296:1997 15.3.1998

Neplatná norma BS ISO 13296:1997 Diesel engines. High pressure fuel injection pipe assemblies. General requirements and dimensions

DIN IEC 60188 1.3.1981

Neplatná norma DIN IEC 60188 DIN VDE 0715-4, VDE 0715-4. High-pressure mercury vapour lamps.

ASTM D7606-11 1.3.2011

Platná norma ASTM D7606-11 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases

ASTM D2754-99 10.3.1999

Historická norma ASTM D2754-99 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape

ASTM D2754-99(2004) 10.3.1999

Historická norma ASTM D2754-99(2004) Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape

ASTM G142-98(2011) 1.3.2011

Historická norma ASTM G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

BS 6469-3-3.1:1992 15.8.1992

Neplatná norma BS 6469-3-3.1:1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds. Pressure test at high temperature. Tests for resistance to cracking

DIN 2271-3 1.2.2000

Neplatná norma DIN 2271-3 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing.

DIN 16963-3 1.8.1980

Neplatná norma DIN 16963-3 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions.

DIN 2271-3 1.11.1976

Neplatná norma DIN 2271-3 Pneumatic Length Measurement (Air Gauging); Parameters of Instruments Working in the High Pressure Range, Requirements, Testing.

BS 2000-61:1999 15.3.1999

Platná norma BS 2000-61:1999 Methods of test for petroleum and its products. Determination of sulfur. High pressure combustion method

DIN EN 60662 1.3.2013

Platná norma DIN EN 60662 High-pressure sodium vapour lamp - Performance specifications.(Vysokotlaké sodíkové výbojky - Požadavky na provedení..)

DIN ISO 4093 1.3.1987

Neplatná norma DIN ISO 4093 Road vehicles; fuel injection pumps; high pressure pipes for testing; identical with ISO 4093, edition 1986.

ASTM A381-96(2012) 1.3.2012

Platná norma ASTM A381-96(2012) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

ASTM A523-96(2012) 1.3.2012

Platná norma ASTM A523-96(2012) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

DIN EN 60811-3-1 1.3.1996

Neplatná norma DIN EN 60811-3-1 VDE 0473-811-3-1. Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds; section 1: Pressure test at high temperature, test for resistance to cracking.

BS EN ISO 15616-3:2003 19.3.2003

Platná norma BS EN ISO 15616-3:2003 Acceptance tests for CO$d2- laser beam machines for high quality welding and cutting. Calibration of instruments for measurement of gas flow and pressure(Zkoušky přípustnosti CO2 laserových zařízení pro vysoce jakostní svařování a řezání - Část 3: Kalibrace zařízení pro měření průtoku a tlaku plynu.)

GOST R ISO 9329-4-2010 1.3.2012

Platná norma GOST R ISO 9329-4-2010 Seamless tubes from austenitic high-alloy steels for pressure purposes. Specifications

E DIN EN ISO 21969 1.3.2009

Neplatná norma E DIN EN ISO 21969 High-pressure flexible connections for use with medical gas systems.

ASTM A336/A336M-05 1.3.2005

Historická norma ASTM A336/A336M-05 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

ASTM A336/A336M-06 1.3.2006

Historická norma ASTM A336/A336M-06 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

ASTM A723/A723M-08 1.3.2008

Historická norma ASTM A723/A723M-08 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

ASTM A965/A965M-00 10.3.2002

Historická norma ASTM A965/A965M-00 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

ASTM A965/A965M-01 10.3.2002

Historická norma ASTM A965/A965M-01 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

ASTM A965/A965M-02 10.3.2002

Historická norma ASTM A965/A965M-02 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

ASTM A965/A965M-02e1 10.3.2002

Historická norma ASTM A965/A965M-02e1 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

ASTM A965/A965M-12 1.3.2012

Historická norma ASTM A965/A965M-12 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

ASTM A691/A691M-09(2014) 1.3.2014

Platná norma ASTM A691/A691M-09(2014) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

ASTM A194/A194M-06 15.3.2006

Historická norma ASTM A194/A194M-06 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

ASTM A194/A194M-07a 1.3.2007

Historická norma ASTM A194/A194M-07a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

ASTM A608/A608M-06(2012) 1.3.2012

Historická norma ASTM A608/A608M-06(2012) Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

SAE J2337/3 1.1.2017

Platná norma SAE J2337/3 Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods (Stabilized: Jan 2017)

SAE J2337/3 1.5.2012

Platná norma SAE J2337/3 Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods

DIN ISO 4548-3 1.7.1987

Neplatná norma DIN ISO 4548-3 Internal combustion engines - Methods of test for full-flow lubricating oil filters - Rresistance to high pressure drop and to elevated temperature; Identical with ISO 4548-3:1982.

E DIN 16963-11 1.3.1996

Neplatná norma E DIN 16963-11 Pipe joint assemblies and fittings for high density polyethylen (PE-HD) pressure pipelines - Part 11: Collars, flanges, sealing rings for socket welding; dimensions.

BS ISO 7612:2006 3.2.2006

Neplatná norma BS ISO 7612:2006 Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions

ISO 13894-1:2000 30.3.2000

Platná norma ISO 13894-1:2000 High-pressure decorative laminates -- Composite elements -- Part 1: Test methods(Stratifiés décoratifs haute pression -- Éléments composites -- Partie 1: Méthodes d`essai)

UNE-EN 15182-4:2007+A1:2010 3.3.2010

Platná norma UNE-EN 15182-4:2007+A1:2010 HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 4: HIGH PRESSURE BRANCHPIPES PN 40(Ručně ovládané požární proudnice - Část 4: Vysokotlaké proudnice PN 40.)

IEC 60188-ed.3.0 30.5.2001

Platná norma IEC 60188-ed.3.0 High-pressure mercury vapour lamps - Performance specifications(Lampes A vapeur de mercure A haute pression - Prescriptions de performance)

STO Gazprom 2-3.2-202-2008 15.9.2008

Platná norma STO Gazprom 2-3.2-202-2008 Operational gas-condensate chink with extremely high formation pressure. Technical requirements and solutions

GOST R ISO 11439-2010 1.3.2012

Neplatná norma GOST R ISO 11439-2010 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications

ASTM A1106/A1106M-17 15.3.2017

Platná norma ASTM A1106/A1106M-17 Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application

ASTM A592/A592M-10(2015) 1.3.2015

Platná norma ASTM A592/A592M-10(2015) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

ASTM A723/A723M-10(2015) 1.3.2015

Platná norma ASTM A723/A723M-10(2015) Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

ASTM A217/A217M-01 10.3.2002

Historická norma ASTM A217/A217M-01 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A217/A217M-02 10.3.2002

Historická norma ASTM A217/A217M-02 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A217/A217M-07 1.3.2007

Historická norma ASTM A217/A217M-07 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A217/A217M-99 10.3.2002

Historická norma ASTM A217/A217M-99 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A226/A226M-95 10.3.1997

Historická norma ASTM A226/A226M-95 Specification for Electric-Resistance-Welded Carbon Steel Boiler Superheater Tubes for High-Pressure Service (Withdrawn 1997)

ASTM A694/A694M-00 10.3.2000

Historická norma ASTM A694/A694M-00 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

ASTM A812/A812M-96 10.3.1997

Historická norma ASTM A812/A812M-96 Standard Specification for Steel, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure Vessels (Withdrawn 1997)

ASTM A193/A193M-16 1.3.2016

Historická norma ASTM A193/A193M-16 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A194/A194M-17 15.3.2017

Historická norma ASTM A194/A194M-17 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

ASTM A193/A193M-06a 1.3.2006

Historická norma ASTM A193/A193M-06a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A193/A193M-07 1.3.2007

Historická norma ASTM A193/A193M-07 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A193/A193M-12 1.3.2012

Historická norma ASTM A193/A193M-12 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

ISO 4548-3:1997 18.9.1997

Platná norma ISO 4548-3:1997 Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 3: Resistance to high differential pressure and to elevated temperature(Méthodes d`essai des filtres a huile de lubrification a passage intégral pour moteurs a combustion interne -- Partie 3: Résistance aux pressions différentielles élevées et aux hautes températures)

DIN EN 12094-5 1.3.2001

Neplatná norma DIN EN 12094-5 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems.(Stabilní hasicí zařízení - Komponenty plynových hasicích zařízení - Část 5: Požadavky a zkušební metody pro vysokotlaké a nízkotlaké sekční ventily a jejich spouštěče.)

ISO 6993-3:2006 14.6.2006

Platná norma ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)(Systemes de canalisations enterrées en poly(chlorure de vinyle) a résistance au choc améliorée (PVC-HI) pour réseaux de combustibles gazeux -- Partie 3: Raccords et colliers pour une pression maximale de service de 1 bar (100 kPa))

ISO 4586-3:2015 28.10.2015

Platná norma ISO 4586-3:2015 High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates(Stratifiés décoratifs haute pression (HPL, HPDL) -- Plaques a base de résines thermodurcissables (communément appelées stratifiés) -- Partie 3: Classification et spécifications des stratifiés d`épaisseur moins de 2 mm d`...

DIN EN 438-3 1.6.2016

Platná norma DIN EN 438-3 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less that 2 mm thick intended for bonding to supporting substrates.(Vysokotlaké dekorativní lamináty (HPL) - Desky na bázi reaktoplastů (obvykle nazývané lamináty) - Část 3: Klasifikace a specifikace pro lamináty o tloušťce menší než 2 mm určené k lepení na nosné podklady.)

DIN EN 438-3 1.4.2005

Neplatná norma DIN EN 438-3 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates.(Vysokotlaké dekorativní lamináty (HPL) - Desky na bázi reaktoplastů (obvykle nazývané lamináty) - Část 3: Klasifikace a specifikace pro lamináty o tloušťce menší než 2 mm určené k lepení na nosné podklady.)

DIN EN 60811-3-1 1.7.2002

Neplatná norma DIN EN 60811-3-1 VDE 0473-811-3-1. Insulating and sheathing materials of electric cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature, test for resistance to cracking.

GOST R ISO 4548-3-2009 1.1.2010

Platná norma GOST R ISO 4548-3-2009 Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 3. Resistance to high differential pressure and to elevated temperature

E DIN EN 438-3 1.11.2014

Neplatná norma E DIN EN 438-3 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates.

E DIN EN 438-3 1.6.2002

Neplatná norma E DIN EN 438-3 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding on supporting substrates.

E DIN ISO 4548-3 1.5.1986

Neplatná norma E DIN ISO 4548-3 Internal combustion engines; methods of test for full-flow lubricating oil filters; resistance to high pressure drop and to elevated temperature; identical with ISO 4548/3, edition 1982.